Maintenance of paver

[quangongzi]

Maintenance work of the paver is usually carried out in the repair shop, but in the construction process if the damage occurred parts, only in the construction site maintenance operations. Whether in the repair shop or at the construction site for maintenance operations, cleaning is the most important, must ensure that the replacement or repair parts clean, to ensure the quality of maintenance and use of results.Small Road Roller - Shanghai Doan Machinery Technology Co.,Ltd

Electrical system maintenance
Electrical system parts and mechanical parts are different, the general failure occurs instantly without any precursor, electrical system failure will pavement construction will bring a series of negative effects. Because of its accidental failure, so the maintenance of electrical systems are generally carried out at the construction site, the maintenance of electrical systems in general to replace the new parts. In the replacement of new parts should be checked before the line is damaged, the connector is loose or too dirty and poor contact, so as to avoid unnecessary waste.
Maintenance of vibrators
Vibrators due to poor working conditions, coupled with this part of the lubrication is carried out by hand, from time to time there are missed butter or not playing into the phenomenon of no timely treatment. Damage to the main vibrator damage to the main bearing and rammer wear. Maintenance is generally replaced parts. If the hammer wear is more serious, and sometimes can not get new parts, tight schedule and circumstances, can be surfacing and then polished smooth, after such treatment can continue to use for some time.
surface dressing specification
paving equipment operator
concrete trowel machine parts