Small roller vibration when walking precautions

General Topics and Introductions

Moderators: mgmirkin, Moderators

Post Reply
quangongzi
Scholar
Scholar
Posts: 37
Joined: Thu Oct 13, 2016 3:10 am

Small roller vibration when walking precautions

Post by quangongzi »

Small roller, hand-held vibratory roller, frame leveling machine Precautions For safety reasons, the machine has no vibration function when it is in precise walking mode. When the small roller vibrates, the pulley vibrates with the vibrator. This vibration effect increases the press force of the machine to the pavement material. The vibrations can have two amplitude options and corresponding to different amplitudes ...
Small roller, hand-held vibratory roller, frame leveling machine use precautions
For safety reasons, the machine has no vibration function in the "exact walking" mode. When the small roller vibrates, the pulley vibrates with the vibrator. This vibration effect increases the press force of the machine to the pavement material. The vibrations can have two amplitude options and different vibrational frequencies corresponding to different amplitudes.Road Repair Machines

The vibration system is controlled by saao to obtain a stable vibration frequency. The vibration frequency is set by the fine adjustment switch. If the engine speed change due to external causes will be calculated and compensated by the control system to obtain a stable vibration frequency.
With the vibration walking process should pay attention to the following matters. Do not turn on vibration near buildings and bridges, as vibration may cause damage to these facilities. Before opening the vibration, make sure there are no pipelines such as water, gas, cables and sewers, etc. These facilities are also susceptible to vibration damage or explosion. The vibration of the wheel will reduce the adhesion of the wheel to the ground, so when dealing with hard ground or through the ramp, the machine may slip or even tipping. When a large compaction amount is required in an earthwork, the machine should pass the compaction material at a slower speed and at an appropriate frequency
non water based driveway sealer
best option intelligent seal coat rainmaker
singer sewing machine maintenance
Post Reply