What is the maintenance of ultrafine mill ?

[kathryn]

The operation of ultrafine mill can make the grinding operation of material better. In the process of ultrafine mill use, we need to make rational use of it as a user. How to make rational use of it, first of all, to carry out reasonable maintenance work, this is to ensure that the machine can carry out the root of normal production.

In fact, the maintenance of the ultrafine mill has a lot of attention. In the process of maintenance, the user should be comprehensive and careful. Comprehensive maintenance makes the performance of all aspects of the machine guaranteed, and in production, it can have better performance. The performance of a pulverizer has a great relationship with its maintenance and maintenance. After full maintenance, the performance of the machine can be further guaranteed.

Before the maintenance of ultrafine mill ?, it is necessary to do a good job of inspection, and the inspection is also a part of the maintenance. The inspection is to prevent the omission in the work, which requires the user to be comprehensive. After a comprehensive inspection, the defects of the machine will be paid attention to, and then some improvements are made.

When checking the ultrafine mill, the user should first check whether the power socket, plug and power cord have any oxygen loss and breakage. If not, plug in the power test machine. When the motor is energized without rotating the hand wheel and toggle rotation, can be concluded that the two starting capacitor of the machine in a failure caused by this case, only the replacement of the. When the power is not turned, the external force can be rotated, but a weak current is sent out in the motor, which is caused by a slight leakage of the starting capacitor. If the sound of the current is too loud, the motor can not start at all, which is due to the short circuit of the starting capacitor. After finding the cause of the failure, it is necessary to carry out the maintenance work.

In addition, during maintenance, we should also pay attention to the professionalism of maintenance personnel. Maintenance is not simply for replacement of parts, but also for exclusion of potential hazards, so as to prevent larger accidents and affect production. Dangerous accidents can also pose a threat to the personal safety of the user, so the user must pay attention to it.