FAQ   Search   Memberlist   Usergroups   Log in   Register
Loading..
Username:
 Password:  
 Getting access to different varieties of All Thread Ro
Author Message
tinawendy
PostPosted: Mon Oct 24, 2016 12:36 am
Reply with quote
Mi-Go Brain-Bait
Mi-Go Brain-Bait


Joined: 23 Oct 2016
Posts: 3

After allowing ample time for the glue to dry, remove the wrapping string, sandpaper the repaired portion, and wrap it solidly with white silk thread. When varnished, the repair will hardly be noticeable. If repaired properly, the fractured tip will be as strong as originally.In taking your fly All Thread Rod down after the day's fishing, disjoint the tip first.

Grasp the tip joint just above the ferrule with one hand, with the arm fully extended above the head, and exert the pull with the other hand, held near the top of the second joint. Never pull with the upper hand, because of the danger of whipping the tip into some obstruction that might break it.

If a bamboo fly rod or light bait-casting rod develops a set, the following method can be used to correct it, although it is not recommended as a permanent repair: Pass the bent joint back and forth carefully over a gas flame until it is thoroughly warm, then work it slowly back into shape.

This will effect a realignment of the splines. In wrapping a rod which has taken a set, it is not advisable to turn the rod over and reverse the guides in an attempt to correct the bend which previous strain has caused.

The online source has facilitated for getting access to different varieties of these rods right from the comforts of your home. You can in fact get these at discounted prices depending on the manufacturer and distributor you are availing the services from. Get Nylon 6/6, 4/40, 6/32 rods and others online today.

When you decide to fish a custom-built rod you are adding another dimension to your sport and enjoyment. There is nothing quite like the thrill of making perfect casts, hooking and landing a fish on a honed surgical tool that has been handcrafted for you.

You don't have to depend upon whether some individual was having a good day at the factory or not when they wrapped the guides on SAE Flat Washer , if they chose the best pieces of cork for the handle system's grip, if the time was taken to ensure that the components were placed on the rod for optimum performance, and that the best quality components were used.
View user's profile Send private message
    
    Display posts from previous:   
Page 1 of 1    Post new topic   Reply to topic
The Temple of Dagon Forum Index All times are GMT - 6 Hours
The time now is Wed Apr 01, 2020 12:03 pm
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum